FFUS15-1G1IO Datasheet, PDF (3/5 Pages) SICK AG – FLOW SENSORS

FFUS15-1G1IO | FFU
FLOW SENSORS
Output signal
Output current
Output load
Lower signal level
Upper signal level
Impuls/frequency output
Puls width
Signal voltage HIGH
Signal voltage LOW
Inductive load
Capacitive load
Response time
Analog output 4 mA ... 20 mA, 0 mA ... 20 mA current flow and temperature, 1 pulse/status
output PNP/NPN-transistor output for flow rate meter, empty pipe detection, flow monitoring,
dosing output, flow direction (dependent on type) ¹⁾
< 100 mA ⁴⁾
< 500 Ohm
3.8 mA ... 4 mA
20 mA ... 20.5 mA
0 kHz ... 10 kHz
≤1s
V_s - 2 V
≤2V
1H
100 nF
Filter off 100 ms, filter low 300 ms, filter medium 1 s, filter strong 4.2 s ⁵⁾
1) _{All connections are polarity protected. All outputs are overload and short-circuit protected.}
2) _{May not exceed or fall below Uv tolerances.}
3) _{Without load.}
4) _{There are 100 mA for each output pnp and npn available.}
5) _{Analog output and display.}
Mechanics
Process connection
Wetted parts
Housing material
Enclosure rating
Weight
G¾
PPSU
PPSU
IP 67
350 g
Ambient data
Ambient operating temperature
Ambient storage temperature
0 °C ... +60 °C
–20 °C ... +70 °C
Classifications
ECl@ss 5.0
ECl@ss 5.1.4
ECl@ss 6.0
ECl@ss 6.2
ECl@ss 7.0
ECl@ss 8.0
ECl@ss 8.1
ECl@ss 9.0
ETIM 5.0
ETIM 6.0
27371815
27371815
27371815
27371815
27371815
27371815
27371815
27371815
EC002580
EC002580
2017-02-08 13:58:08 | Online data sheet
S ubject to change without notice
FLUID SENSORS | SICK
3