TS3USB3000_15 Datasheet, PDF (14/26 Pages) Texas Instruments – DPDT USB 2.0 High-Speed and Mobile High-Definition Link Switch

TS3USB3000
SCDS337B – DECEMBER 2012 – REVISED DECEMBER 2015
www.ti.com
Typical Application (continued)
9.2.2 Detailed Design Procedure
The TS3USB3000 can be properly operated without any external components. However, TI recommends that
unused pins must be connected to ground through a 50-Ω resistor to prevent signal reflections back into the
device.
9.2.3 Application Curves
Figure 16. Eye Pattern: 0.7 Gbps With No Device
Figure 17. Time Interval Error Histogram: 0.7 Gbps With
No Device
The TS3USB3000 contributes only 8.4 ps of peak-to-peak jitter
for 0.7-Gbps data rate.
Figure 18. Eye Pattern: 0.7 Gbps for MHL Switch
The TS3USB3000 contributes only 8.4 ps of peak-to-peak jitter
for 0.7-Gbps data rate.
Figure 19. Time Interval Error Histogram: 0.7 Gbps for
MHL Switch
14
Submit Documentation Feedback
Copyright © 2012–2015, Texas Instruments Incorporated
Product Folder Links: TS3USB3000