LQ035Q7DH01 Datasheet, PDF (9/24 Pages) Sharp Electrionic Components – TFT-LCD Module

Note 7-1 DCLK,SPL,SPR,LBR,LP,PS,REV,R0 R5,G0 G5 and B0 B5 terminals are applied.
Note 7-2 DCLK,SPL,SPR,LBR,LP,REV,R0 R5,G0 G5 and B0 B5 terminals are applied.
Note 7-3 PS terminal is applied.
Note 7-4 MOD,CLS,SPS and U/L terminals are applied.
Note 7-5 VCOMAC should be alternated on VCOMDC every 1 horizontal period and 1 vertical period.
VCOMDC bias is adjusted so as to minimize flicker or maximum contrast every each
module .
B) Back light driving section
Table 7
Parameter
Symbol MIN
LED voltage
VL
LED current
IL
Power consumption
WL
Note 7-6 Calculated reference value(IL VL)
TYP
21.6
15
0.324
MAX
25.2
20
Units
V
A
W
Ta=25
Remarks terminal
Note 7-6