GP2W0002YP Datasheet, PDF (9/14 Pages) Sharp Electrionic Components – Low Power Infrared Transceiver

Low Power Infrared Transceiver
GP2W0001YP/GP2W0002YP
MECHANICAL DESIGN
APPLICATION TIPS
Recommended Footprint
Figure 15 shows the basic recommended footprint
for PCB design using the SHARP GP2W0001YP infra-
red transceiver module. All values shown here are for
reference, and are in mm.
Electro-Mechanical Design Tip
Figure 16 gives a recommended set of locations for
resistors and capacitors for better performance, partic-
ularly for the power supply (V_CC) line. R₁ and CX₁, as
shown in Figure 16, should be mounted near the
GP2W0001YP transceiver module for best perfor-
mance. All values in Figure 16 are for reference and
are in mm.
1.5 1.1
1.1 1.5
NOTE: Dimensions are in mm.
6 - 0.9
P1.4
7.0
Figure 15. Recommended Footprint
GP2W0001YP-33
Technical Information
9