LQ084S3LG01 Datasheet, PDF (5/26 Pages) Sharp Electrionic Components – Strong 2 SVGA LCD Module featuring 400 nits brightness with 600:1 contrast. Full Specifications Listing

1. Application
This specification applies to the color TFT-LCD module, LQ084S3LG01.
LCY-W07802-2
2. Overview
This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
It is composed of a color TFT-LCD panel, driver ICs, control circuit, power supply circuit and a back light unit.
Graphics and texts can be displayed on a 800×RGB×600 dots panel with about 16 million colors by using
LVDS (Low Voltage Differential Signaling) and supplying +3.3V DC supply voltages for TFT-LCD panel
driving and supply voltage for backlight.
(Note: Backlight-driving DC/AC inverter is not built in this module.)
a) Fine images with stripe aligned 480,000 pixels on 8.4 inch diagonal screen
b) Adapting a wide viewing angle technology [best viewing angle: 6 o’clock direction]
（12 o’clock direction is also available by the function to flip the screen horizontally or vertically）
c) High contrast, thanks to active matrix drive system
d) AG(Anti Glare) polarizing filter
e) Light and slim compact module
f) Natural coloring reproducibility by employing normally-white-mode, which has good nature in coloring
g) Image inversion both horizontally and vertically
h) This module is adapted to RoHS compliance.
3. Mechanical Specifications
Parameter
Specifications
Display size
21.3 (Diagonal)
8.4 (Diagonal)
Active area
170.4 (H)×127.8 (V)
Pixel format
800 (H)×600 (V)
(1 pixel＝R+G+B dots)
Pixel pitch
0.213 (H)×0.213 (V)
Pixel configuration
R, G, B vertical stripe
Display mode
Normally white
Unit outline dimensions *1
199.5(W)×149.5(H)×11.6(D)
Mass
405(MAX)
Surface treatment
Anti-glare and hard-coating
*1.Note: excluding back light cables.
The thickness of module (D) doesn’t contain the projection.
Outline dimensions are shown in Fig.1.
Unit
cm
Inch
mm
Pixel
mm
mm
g