LQ084S3LG01 Datasheet, PDF (12/26 Pages) Sharp Electrionic Components – Strong 2 SVGA LCD Module featuring 400 nits brightness with 600:1 contrast. Full Specifications Listing

LCY-W07802-9
4-4. Backlight
The module-side connector ：BHR-04VS-1
(JST)
The user-side connector ：SM0４(４.0)B-BHS (JST)
Pin no. symbol
Function
1 VHIGH
Power supply for lamp 1 (High voltage side)
2 VHIGH
Power supply for lamp 2 (High voltage side)
3 NC
Open
4
【Note】
VLOW
Power supply for lamp 1,2 (Low voltage side)
The input voltage wave forms to terminal (1) and terminal (2) should be in a same phase.
It has the possibility to discharge abnormally between the terminals in case of input in a reversed phase.
5 Absolute Maximum Ratings
Parameter
Symbol Condition
Ratings
Unit Remark
Input voltage
Supply voltage
VI Ta=25°C -0.3 ~ Vcc+0.3 V [Note 1]
Vcc Ta=25°C
0 ~ +4.0
V
-
Storage temperature
Tstg
-
-30 ~ +80
°C [Note 2,3,4,5]
Operating temperature (Panel surface)
Topp
-
-30 ~ +80
°C
[Note 1] CK, R0 ~ R5, G0 ~ G5, B0 ~ B5 and ENAB
[Note 2] Preserve it within this range.
[Note 3] Humidity: Less than 95%RH at Ta ≤ 40°C and
Maximum wet-bulb temperature must not exceed 39°C at Ta>40°C,
with no condensation.
[Note 4] The operating temperature only guarantees operation of the circuit. For contrast, speed response,
and other factors related to display quality, judgment is done using the ambient temperature Ta =+25°C.
[Note 5] This rating applies to all parts of the module and should not be exceed.