GP1A34LC Datasheet, PDF (4/4 Pages) Sharp Electrionic Components – OPIC Photointerrupter with Connector

s Precautions for Use
( 1) In this product, the PWB is fixed with a hook, and cleaning solvent may remain inside
the case; therefore, dip cleaning or ultrasonic cleaning are prohibited.
( 2) Remove dust or stains, using an air blower or a soft cloth moistened in cleaning slovent.
However, do not perform the above cleaning using a soft cloth with cleaning solvent in the
marking portion.
In this case, use only the follwing type of cleaning solvent used for wiping off:
Ethyl alcohol, Methyl alcohol, Isopropyl alcohol
When the cleaning solvents except for specified materials are used, please consult us.
( 3) In order to stabilize power supply line, connect a by-pass capacitor of more than 0.01µF
between Vcc and GND near the device.
( 4) As for other general cautions, refer to the chapter “ Precautions for Use ”.
GP1A34LC