GP1A05A2 Datasheet, PDF (4/5 Pages) Sharp Electrionic Components – OPIC Photointerrupter with Connector

GP1A05A2
s Recommended Connectors on the Inserted Side
x JAPAN SOLDERLESS TERMINAL MFG. CO., LTD. made
Housing Model No.
AWG
size
Special
terminal
Model. No.
AWG
28 to 22
AWG
30 to 28
H3P-SHF-AA
Material
Model No.
Brass
SHF-001T-0.8SS
Copper phosphide SHF-001T-0.8BS
Brass
SHF-002T-0.8SS
Copper phosphide SHF-002T-0.8BS
AWG
size
AWG
27 to 22
AWG
30 to 28
(Natural color • bulk)
S3P-SHF-1
Material
Model No.
Brass
SHF-001T-0.8P
Copper phosphide
−
Brass
SHF-002T-0.8P
Copper phosphide
−
s Precautions for Use
1. It is recommended that a by-pass capacitor of more than 0.01µF be added between VCC and GND near the device in order to
stabilize power supply line.
2. Please don't carry out immersion cleaning or ultrasonic cleaning to avoid keeping solvent inside case of this device.
3. Remove dust or stains, using an air blower or a soft cloth moistened in cleaning solvent.
However, do not perform the above cleaning using a soft cloth with cleaning solvent in the marking portion.
In this case, use only the following type of cleaning solvent used for wiping off :
Ethyl alcohol, Methyl alcohol, Isopropyl alcohol,
When the cleaning solvents except for specified materials are used, please consult us.
4. As for other general cautions, refer to the chapter "Precautions for Use. "