GP1A05 Datasheet, PDF (4/4 Pages) Sharp Electrionic Components – OPIC Photointerrupter with Connector

GP1A05/GP1A22LC/GP1A23LC/GP1A25LC
s Recommended Connectors on the Inserted Side
Recommended connectors on the inserted side for GP1A05,GP1A22LC, and GP1A23LCare shown below.
<< GP1A05 >>
q JAPAN AMP made El series connectors
(standard type )
q JAPAN AMP made El series connectors
(low profile type )
Housing color
Natural
color
Black
Blue
Green
Red
Housing Model No. 171822-3 2-171822-3 4-171822-3 6-171822-3 8-171822-3
AWG Product
size shape
Material Model No.
Brass 170204-1
Special
terminal
Model. No.
AWG
26 to 20
Bulk
Chain
Copper
phosphide
170204-2
Brass 170262-1
Copper
phosphide
170262-2
Brass 170205-1
AWG
30 to 26
Bulk
Copper
phosphide
170205-2
Brass 170263-1
Chain
Copper
phosphide
170263-2
Natural
Housing color _color Black Blue Green Red
Housing Model No. 172142-3 2-172142-3 4-172142-3 6-172142-3 8-172142-3
Special
terminal
Model. No.
( Material:
Copper
phosphide )
AWG
size
AWG
26 to 22
AWG
30 to 26
Product shape
Bulk
Chain
Bulk
Chain
Model No.
170369-1
170354-1
170370-1
170355-1
q JAPAN AMP made El series connectors
(amp mass termination )
Housing-terminal ^AWG28
united type ^(Green)
AWG26
( Natural
color )
AWG24
( Black )
AWG22
(Red)
connector 172054-3 172053-3 172052-3 172051-3
* Terminal Material : Copper phosphide
<<GP1A22LC/ GP1A23LC>>
q JAPAN SOLDERLESS TERMINAL MSG. CO., LTD. made (Natural color • bulk )
Housing Model No.
Special
terminal
Model. No.
AWG
size
AWG
26 to 22
AWG
30 to 26
H3P-SHF-AA
Material Model No.
Brass
Copper
phosphide
Brass
Copper
phosphide
SHF-001T-0.8SS
SHF-001T-0.8BS
SHF-002T-0.8SS
SHF-001T-0.8BS
AWG
size
AWG
27 to 22
AWG
30 to 28
S3P-SHF-1
Material Model No.
Brass
Copper
phosphide
Brass
Copper
phosphide
SHF-001T-0.8P
-
SHF-002T-0.8P
-
s Precautions for Use
(1) It is recommended that a by-pass capacitor of more than 0.01 µ F be added betw een V_CC and GND
near the device in order to stabilize power supply line.
( 2) In this product, the PWB is fixed with a rear cover, and cleaning solvent may remain inside the
case; therefore, dip cleaning or ultrasonic cleaning is prohibited.
( 3) Remove dust or stains, using an air blower or a soft cloth moistened in cleaning solvent.
However, do not perform the above cleaning using a soft cloth with cleaning solvent in the
marking portion.
In this case, use only the following type of cleaning solvent used for wiping off:
Ethyl alcohol, Methyl alcohol, Isopropyl alcohol,
When the cleaning solvents except for specified materials are used, please consult us.
( 4) As for other general cautions, refer to the chapter “ Precautions for Use ”.