GP1A05 Datasheet, PDF (2/4 Pages) Sharp Electrionic Components – OPIC Photointerrupter with Connector

GP1A05/GP1A22LC/GP1A23LC/GP1A25LC
Internal connection diagram ( Common to 4 models )
Voltage regulator
Amp.
1
1 V_CC
2 _{2 GND}
3 V_O
3
s Absoulte Maximum Ratlngs
Parameter
Supply
GP1A05
voltage GP1A22LC / GP1A23LC / GP1A25LC
*1_{Output voltage}
*2_{Low level output current}
*3_{Operating temperature}
*3_Storage
tempera-
ture
GP1A05 / GP1A22LC / GP1A23LC
GP1A25LC
Symbol
V CC
VO
I OL
T opr
T stg
*1 Collector-emitter voltage of output transistor
*2 Collector current of output transistor
*3 The connector should be plugged in/out at normal temperature.
(Ta = 25˚C )
Rating
Unit
- 0.5 to + 10
V
- 0.5 to + 8
- 0.5 to + 28
V
50
mA
- 20 to + 75
˚C
- 40 to + 85
˚C
- 30 to + 85
s Electro-optical Characteristics
( Unless otherwise specified, Vcc = 5V, Ta = 25˚C)
Parameter
Operating supply voltage
Low level supply current
Low level output voltage
High level supply current
High level output voltage
*5_{Response frequency}
Symbol
Conditions
MIN. TYP. MAX. Unit
V CC
4.5
-
5.5
V
ICCL Light beam uninterrupted
-
-
30
mA
V OL Light beam uninterrupted,I OL= 16mA
-
-
0.35
V
I CCH Light beam interrupted
-
-
30
mA
V OH Light beam interrupted,RL = 47k Ω V CC x 0.9 -
-
V
f
*4_{RL= 47k Ω}
-
- 3 000 Hz
*4 No DC output is allowed.
*5 Response frequency is measured with the disk shown below being rotated.( Unit : mm )
Disk
0.5
0.5