GP2W0106YP Datasheet, PDF (3/16 Pages) Sharp Electrionic Components – 115 kbps Transceiver

115 kbps Transceiver
T
T
1
0
1
0
1
3T/16
2
3
4
5
0
1
0
1
NOTES:
1 Transmitting data waveform
2 Encoder circuit output waveform
3 Transmitter output optical signal waveform
4 GP2W0106YP receiver output waveform
5 Receiving data waveform
T=
1
Data Rate
Data rate: 2.4 kbps, 9.6 kbps, 19.2 kbps, 38.4 kbps,
57.6 kbps, 115.2 kbps
GP2W0106YP-4
Figure 4. Example of Signal Waveform
GP2W0106YP
Recommended Size of
Solder Cream Paste
Open the solder mask as shown in Figure 5. The
size of solder cream paste for this device before reflow
soldering must be as large as one of the foot pattern
land, indicated in Figure 6.
1.55
0.6
0.475
1.425
2.375
3.325
NOTES:
1. Dimensions are in mm.
2. Dimensions are for reference.
3.
Soldering paste area
GP2W0106YP-6
Figure 5. Solder Cream Paste Size
1.55
CENTER OF
MOUNTING AREA
PIN
PIN NAME
SYMBOL
1 NC
2 NC
3 V_DD
4 Ground
5 Shutdown
6 Receiver Data Output
7 Transmitter Data Input
8 LED Anode
NC
NC
V_DD
GND
SD
RXD
TXD
LEDA
8 76 5
4 32 1
0.6
0.475
1.425
2.375
3.325
NOTES:
1. Dimensions are in mm.
2. Dimensions are shown for reference.
3. Connect foot pattern of shield case to GND pattern.
Figure 6. Foot Pattern of PCB
IrDA Data Sheet
GP2W0106YP-5
3