GP1UC10 Datasheet, PDF (2/3 Pages) Sharp Electrionic Components – 3V-Operating Type IR Detecting Unit for Remote Control

GP1UC10 Series
s Absolute Maximum Ratings
(Ta=25˚C)
Parameter
Symbol
Rating
Unit
Supply voltage
V CC
0 to 4.0
V
Operating temperature
Topr
- 10 to + 70 ^*1
˚C
Storage temperature
Tstg
- 20 to + 70
˚C
Reflow soldering temperature Tsol 240 (reflow soldering time : 5 sec) ˚C
*1 No dew condensation is allowed.
s Recommended Operating Conditions
Parameter
Supply voltage
Symbol Rating Unit
VCC 2.4 to 3.6 V
s Electro-optical Characteristics
(Ta=25˚C, V_CC =+3V)
Parameter
Dissipation current
High level output voltage
Low level output voltage
High level pulse width
Low level pulse width
B.P.F. center frequency
Ultimate distance
Symbol
ICC
V OH
V OL
T1
T2
fO
-
Conditions
No input light
*2
*2,I OL= 400 mA
*2
*2
-
-
MIN. TYP. MAX. Unit
-
-
2.5
mA
VCC- 0.5
-
-
V
-
-
0.5
V
400
-
800
µs
400
-
800
-
*3
-
kHz
8
-
-
m
*2 The burst wave as shown in the following figure shall be transmitted by the transmitter of our specifications.
The carrier frequency of the transmitter, however, shall be same as *3, and measurement shall be taken of the 100th and subsequent pulses after start of transmission.
*3 The B.P.F. center frequency fo varies with model, as shown in s Model Line-ups.
Burst wave
fO = ( *3 )kHz
Duty 50%
600 µs
600 µs
Fig. 1 B.P.F. Frequency Characteristics
[TYP.](GP1UC101)
28 30 32 34 36 38 40 42 44 46 48
Carrier frequency (kHz)
Fig. 2 Sensitivity Angle (Horizontal Direction)
Characteristics [TYP.] for Reference
- 15˚
0˚
+ 15˚
- 30˚
100
+ 30˚
80
60
- 45˚
+ 45˚
40
- 60˚
+ 60˚
20
- 75˚
+ 75˚
- 90˚
+ 90˚