GP1UC10 Datasheet, PDF (1/3 Pages) Sharp Electrionic Components – 3V-Operating Type IR Detecting Unit for Remote Control

GP1UC10 Series
GP1UC10 Series
3V-Operating Type IR Detecting
Unit for Remote Control
s Features
1. Low voltage drive type
Supply voltage : 2.4 to 3.6V
2. Compact and surface mount type
Mounting area : 4/5 compared with GP1U90X
3. Reflow soldering type (240˚C, for 5 seconds or less)
4.Taping reel type
(φ 330 mm reel, 1500 pieces)
5. Various B.P.F. (Band Pass Frequency) frequency to meet different user needs
(36.7kHz/38kHz/40kHz/56.8kHz)
s Applications
1. Camera-integral VCRs
2. Cameras
s Outline Dimensions
(0.9)
Detector center
8.1
(Unit : mm)
1 V_CC
2 V_OUT
3 GND
4 Case GND
g Dummy pattern
(GND potential)
3 - 0.9
2
g
1
3 - 0.9
3
g
4
6 - R0.4
3.75 3.75
* Pattern example viewed from PWB
Case GND terminal area
C0.5
2.2 5.7 2.2
area : Be careful not to pull
around the pattern.
* Tolerance : ± 0.3 mm
s Model Line-ups
Model No.
GP1UC10
GP1UC101
GP1UC102
GP1UC107
B.P.F. frequency
Unit
40
38
kHz
36.7
56.8
s Internal Block Diagram
Limiter
B.P.F. Demodulator Integrator Comparator
Vout
Vcc
GND
*CR for power filter is necessary.
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”