GP1S51VJ000F Datasheet, PDF (1/12 Pages) Sharp Electrionic Components – Gap : 3mm Slit : 0.5mm Phototransistor Output, Case package Transmissive Photointerrupter

GP1S51VJ000F
GP1S51VJ000F
Gap : 3mm Slit : 0.5mm
Phototransistor Output,
Case package Transmissive
Photointerrupter
■ Description
GP1S51VJ000F is a standard, phototransistor output,
transmissive photointerrupter with opposing emitter and
detector in a case, providing non-contact sensing. For
this family of devices, the emitter and detector are insert-
ed in a case, resulting in a through-hole design.
The case includes additional screw fixing holes, on
both sides 3.2mm diameter.
■ Agency approvals/Compliance
1. Compliant with RoHS directive
■ Applications
1. General purpose detection of object presence or mo-
tion.
2. Example : Printer, FAX, Optical storage unit
■ Features
1. Transmissive with phototransistor output
2. Highlights:
• Verical Slit for alternate motion detection
• Includes additional screw fixing holes
3. Key Parameters:
• Gap Width : 3mm
• Slit Width (detector side): 0.5mm
• Package : 12.2×10×18mm
4. Lead free and RoHS directive compliant
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D3-A02401EN
1
Date Oct. 3. 2005
© SHARP Corporation