GP1S25J0000F Datasheet, PDF (1/11 Pages) Sharp Electrionic Components – SMT, Gap : 1.6mm, Slit : 0.3mm Phototransistor Output, Compact Transmissive Photointerrupter

GP1S25J0000F
GP1S25J0000F
SMT, Gap : 1.6mm, Slit : 0.3mm
Phototransistor Output,
Compact Transmissive
Photointerrupter
■ Description
GP1S25J0000F is a compact-package, phototransistor
output, transmissive photointerrupter, with opposing
emitter and detector in a molding that provides non-
contact sensing. The compact package series is a
result of unique technology combing transfer and
injection molding.
This device has two positioning pins, right angle
package, and is reflow solderable.
■ Agency approvals/Compliance
1. Compliant with RoHS directive
■ Applications
1. General purpose detection of object presence or
motion.
2. Example: printer, lens control for camera
■ Features
1. Transmissive with phototransistor output
2. Highlights:
• Compact Size
• Positioning Pin
• Surface Mount Type (SMT)
• Sideling terminal
3. Key Parameters:
• Gap Width: 1.6mm
• Slit Width (detector side): 0.3mm
• Package: 3.85×3.4×5.2mm
4. Lead free and RoHS directive compliant
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D3-A00102EN
1
Date Sep. 1. 2006
© SHARP Corporation