GP1A75E Datasheet, PDF (1/3 Pages) Sharp Electrionic Components – Small Size OPIC Photointerrupter with Connector

GP1A75E
s Features
1. 3-pin connector terminal
2. High sensing accuracy
( Slit width: 0.5mm )
3. Wide gap between light emitter
and detector ( 5mm )
s Applications
1. Copiers
2. Laser beam printers
3. Facsimiles
GP1A75E
Small Size OPIC Photointerrupter
with Connector
s Outline Dimensions
(Unit : mm )
Internal connection diagram
(6.8)
Voltage regulator
φ ^3.2
2.5
Amp.
1
2
15k Ω
3
24
JAPAN AMP made connector No.175487-3
Case surface
4.7
13.6
9.6
2.6
4.3 5 4.3 _6.8 ^{± 1.0}
2.35
2 - 0.5 ± 0.1
Slit width
18.1
2.4 ₁
32
0.3
0.9
+
-
0.2
0.15
1
2-R3.2
23
1 GND
2 V_OUT
3 V_CC
Chip resistor
* Unspecified tolerances
shall be as follows ;
Dimensions(d) Tolerance
d< 5.0 ± 0.15
5.0<=d< 15.0 ± 0.2
15.0<=d
± 0.3
* ( ) : Reference dimensions
*“OPIC” ( Optical IC ) is a trademark of the SHARP Corporation.
An OPIC consists of a light-detecting element and signal-
processing circuit integrated onto a single chip.
s Absolute Maximum Ratings (Ta= 25˚C )
Parameter
Supply voltage
*1 _{Low level output current}
*2_{Operating temperature}
*2 _{Storage temperature}
Symbol Rating Unit
V CC - 0.5 to + 10 V
I OL
50
mA
Topr - 20 to + 75 ˚C
Tstg - 30 to + 85 ˚C
*1 Collector current of output transistor
*2 The connector should be plugged in/out and the unit's hook should be used at normal termperature.
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”