SGM4717YD Datasheet, PDF (9/10 Pages) SG Micro Corp – 4.5Ω, 300MHz Bandwidth, Dual, SPDT Analog Switch

PACKAGE OUTLINE DIMENSIONS
DFN-10
Symbol
A
A1
A3
b
D
D2
E
E2
e
K
K2
L
L1
L2
N
ND
Dimensions In Millimeters
Min
NOM
Max
0.70
0.75
0.80
0.00
0.02
0.05
0.20 REF
0.18
0.25
0.30
3.00 BSC
2.23
2.38
2.48
3.00 BSC
1.49
1.64
1.74
0.50 BSC
0.20
0.17
0.30
0.40
0.50
0.15
0.13
10
5
NOTES:
1. Dimensioning and tolerancing conform to ASME
Y14.5M-1994.
2. All dimensions are in millimeters, angle is in degrees (°).
3. N is the total number of terminals.
4. The terminal #1 identifier and terminal numbering
convention shall conform to JESD 95-1 SPP-012. Details of
terminal #1 identifier are optional, but must be located
within the zone indicated. The terminal #1 identifier may
be either a mold, embeded metal or mark feature.
5. Dimension b applies to metallized terminal and is measured
between 0.15MM and 0.30MM from terminal tip.
6. ND refers to the maximum number of terminals on D side.
7. Unilateral coplanarity zone applies to the exposed heat
sink slug as well as the terminals.
9
SGM4717YD