SGM8703 Datasheet, PDF (2/15 Pages) SG Micro Corp – Push-Pull Output Comparator with Latch Enable

SGM8703
Micro-Power, CMOS Input, RRIO, 1.4V,
Push-Pull Output Comparator with Latch Enable
PACKAGE/ORDERING INFORMATION
MODEL
SGM8703
PIN-
PACKAGE
SOT-23-6
SPECIFIED
TEMPERATURE
RANGE
-40℃ to +85℃
ORDERING
NUMBER
SGM8703YN6G/TR
PACKAGE
MARKING
S5DXX
PACKAGE
OPTION
Tape and Reel, 3000
NOTE: Order number and package marking are defined as the follow:
ORDER NUMBER
SGM8703 X X G / TR
Tape and Reel
Green Product
Package Type
MARKING INFORMATION
SYY X X
Date code - month ("A" = Jan. "B" = Feb. … "L" = Dec.)
Date code - year ("A" = 2010, "B" = 2011 …)
Chip I.D.
N6 SOT-23-6
For example: S5DBA (2011, January)
Operating Temperature Range
Y
-40℃ to +85℃
ABSOLUTE MAXIMUM RATINGS
PIN CONFIGURATION (TOP VIEW)
Supply Voltage, +V_S to -V_S ...…………………………….……..6V
VIN Differential……………………………...…...….…...........±2.5V
Voltage at Input/Output pins………..(-V_S) - 0.3V to (+V_S) + 0.3V
Operating Temperature Range............................-40℃ to +85℃
Junction Temperature....................................................... 150℃
Storage Temperature.........................................-65℃ to +150℃
Lead Temperature (soldering, 10s) ...................................260℃
ESD Susceptibility
HBM..................................................................................3000V
MM..................................................................................... 400V
V_OUT 1
6 +V_S
-V_S ²
+
V_IN+ ³
5 LE
4
V_IN-
SOT-23-6
NOTE: The location of pin 1 on the SGM8703 is determined by
orienting the package marking as shown.
CAUTION
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
SG Micro Corp
2
www.sg-micro.com