SGM8703 Datasheet, PDF (1/15 Pages) SG Micro Corp – Push-Pull Output Comparator with Latch Enable

SGM8703
Micro-Power, CMOS Input, RRIO,
1.4V, Push-Pull Output Comparator
with Latch Enable
GENERAL DESCRIPTION
FEATURES
The SGM8703 is an ultra low power comparator with a
typical power supply current of 300nA. It has the
best-in-class power supply current versus propagation
delay performance. The propagation delay is as low as
6μs with 100mV overdrive at 1.4V supply.
Designed to operate over a wide range of supply voltages,
from 1.4V to 5.5V, with guaranteed operation at 1.4V,
2.5V and 5.0V, the SGM8703 is ideal for use in a variety
of battery-powered applications. With rail-to-rail common
mode voltage range, the SGM8703 is well suited for
single-supply operation. Its small package makes ^this
device _{ideal for use in handheld electronics and mobile}
phone applications.
Featuring a push-pull output stage and has a latch enable
input ( LE ), the SGM8703 allows for operation with
absolute minimum power consumption when driving any
capacitive or resistive load.
● Ultra Low Power Consumption:
300nA (TYP) at V_S = 1.4V
● Wide Supply Voltage Range: 1.4V to 5.5V
● Propagation Delay: 6μs (TYP) at V_S = 1.4V
● Push-Pull Output Current Drive:
19mA (TYP) at V_S = 5V
● Rail-to-Rail Input
● Latch Function Included
● -40℃ to +85℃ Operating Temperature Range
● Available in Green SOT-23-6 Package
APPLICATIONS
RC Timers
Window Detectors
IR Receiver
Multivibrators
Alarm and Monitoring Circuits
SGM8703 is available in the Green SOT-23-6 package. It
is rated over the -40°C to +85°C temperature range.
SG Micro Corp
www.sg-micro.com
REV. A. 2