SGM8521_17 Datasheet, PDF (2/16 Pages) SG Micro Corp – CMOS Operational Amplifiers

SGM8521/2/4
150kHz, 5.5μA, Rail-to-Rail I/O
CMOS Operational Amplifiers
PACKAGE/ORDERING INFORMATION
MODEL
PACKAGE
DESCRIPTION
SPECIFIED
TEMPERATURE
RANGE
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
SGM8521
SGM8522
SGM8524
SOT-23-5
SOIC-8
SOIC-8
MSOP-8
SOIC-14
TSSOP-14
-40℃ to +125℃
-40℃ to +125℃
-40℃ to +125℃
SGM8521XN5/TR
SGM8521XS/TR
SGM8522XS/TR
-40℃ to +125℃ SGM8522XMS/TR
-40℃ to +125℃ SGM8524XS14/TR
-40℃ to +125℃ SGM8524XTS14/TR
8521
SGM8521XS
XXXXX
SGM8522XS
XXXXX
SGM8522
XMS
XXXXX
SGM8524XS14
XXXXX
SGM8524
XTS14
XXXXX
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 2500
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 3000
NOTE: XXXXX = Date Code and Vendor Code.
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, +V_S to -V_S ................................................ 6V
Common Mode Input Voltage ..... (-V_S) - 0.3V to (+V_S) + 0.3V
Package Thermal Resistance @ T_A = +25℃
SOT-23-5, θ_JA .......................................................... 190℃/W
SOIC-8, θ_JA .............................................................. 125℃/W
MSOP-8, θ_JA ............................................................ 216℃/W
Storage Temperature Range ........................-65℃ to +150℃
Junction Temperature .................................................+150℃
Lead Temperature (Soldering 10sec) .........................+260℃
ESD Susceptibility
HBM............................................................................. 4000V
MM................................................................................. 400V
RECOMMENDED OPERATING CONDITIONS
Operating Temperature Range .....................-40℃ to +125℃
OVERSTRESS CAUTION
Stresses beyond those listed may cause permanent damage
to the device. Functional operation of the device at these or
any other conditions beyond those indicated in the operational
section of the specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
reliability.
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage
because very small parametric changes could cause the
device not to meet its published specifications.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, specification or other related things if necessary
without notice at any time.
SG Micro Corp
www.sg-micro.com
JANUARY 2017
2