SGM800 Datasheet, PDF (2/11 Pages) SG Micro Corp – Capacitor-Adjustable Reset Timeout Delay

SGM800
Low-Power, SOT µP Reset Circuit with
Capacitor-Adjustable Reset Timeout Delay
PACKAGE/ORDERING INFORMATION
MODEL PIN-PACKAGE
SGM800
SOT-23-5
RESET
THRESHOLD (TYP)
1.63V
2.32V
2.63V
2.93V
ORDERING
NUMBER
SGM800-1.63YN5G/TR
SGM800-2.32YN5G/TR
SGM800-2.63YN5G/TR
SGM800-2.93YN5G/TR
PACKAGE
MARKING
S69XX
S6AXX
S6BXX
S6CXX
PACKAGE
OPTION
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
NOTE: Order number and package marking are defined as the follow:
ORDER NUMBER
SGM800 - X X X G / TR
MARKING INFORMATION
SYY X X
Tape and Reel
Green product
Date code - Month ("A" = Jan. "B" = Feb. … "L" = Dec.)
Date code - Year ("A" = 2010, "B" = 2011 …)
Chip I.D.
Package Type
N5 SOT-23-5
Operating Temperature Range
Y
-40℃ to +85℃
Reset Threshold
1.63 1.63V
2.32 2.32V
2.63 2.63V
2.93 2.93V
For example: S69BA (2011, January)
ABSOLUTE MAXIMUM RATINGS
All Voltages Referenced to GND
VCC.............................................................................-0.3V to 6V
RESET ^{(open-drain).................................................-0.3V to 6V}
Input Current (all pins)........................................................20mA
Output Current (_RESET ) ....................................................20mA
Operating Temperature Range ...........................-40℃ to +85℃
Storage Temperature Range ............................-65℃ to +150℃
Junction Temperature........................................................150℃
Lead Temperature (Soldering, 10s) ..................................260℃
ESD Susceptibility
HBM................................................................................. 3000V
MM......................................................................................300V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
SG Micro Corp
2
www.sg-micro.com