SGM708 Datasheet, PDF (2/12 Pages) SG Micro Corp – Low-Cost, Microprocessor Supervisory Circuit

SGM708
Low-Cost, Microprocessor
Supervisory Circuit
PACKAGE/ORDERING INFORMATION
MODEL
SGM708
RESET
THRESHOLD (V)
4.65
4.40
4.0
3.08
2.93
2.63
PACKAGE
DESCRIPTION
SOIC-8
SOIC-8
SOIC-8
SOIC-8
SOIC-8
SOIC-8
ORDERING
NUMBER
SGM708-LYS8G/TR
SGM708-MYS8G/TR
SGM708-JYS8G/TR
SGM708-TYS8G/TR
SGM708-SYS8G/TR
SGM708-RYS8G/TR
PACKAGE
MARKING
SGM708-LYS8
SGM708-MYS8
SGM708-JYS8
SGM708-TYS8
SGM708-SYS8
SGM708-RYS8
PACKAGE
OPTION
Tape and Reel, 2500
Tape and Reel, 2500
Tape and Reel, 2500
Tape and Reel, 2500
Tape and Reel, 2500
Tape and Reel, 2500
NOTE: Order number is defined as the follow:
ORDER NUMBER
SGM 708- X Y X G / TR
Tape and Reel
Green product
Package Type
S8 SOIC-8
Operating Temperature Range
Y
-40℃ to +85℃
RESET THRESHOLD
L: 4.65V
M: 4.40V
J: 4.0V
T: 3.08V
S: 2.93V
R: 2.63V
ABSOLUTE MAXIMUM RATINGS
(Typical values are at T_A = +25℃, unless otherwise noted.)
Terminal Voltage (with respect to GND)
V_CC........................................................................-0.3V to 6.0V
All Other Inputs........................................ -0.3V to (VCC + 0.3V)
Input Current, V_CC..............................................................20mA
GND................................................................................. 20mA
Output Current, (all outputs)............................................. 20mA
Operating Temperature Range........................... -40℃ to +85℃
Junction Temperature....................................................... 150℃
Storage Temperature........................................ -65℃ to +150℃
Lead Temperature (Soldering, 10sec).............................. 260℃
ESD Susceptibility
HBM..................................................................................4000V
MM......................................................................................300V
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
SG Micro Corp
2
www.sg-micro.com