SGM4866 Datasheet, PDF (2/12 Pages) SG Micro Corp – 1.28W Stereo Audio Power Amplifier

SGM4866
1.28W Stereo Audio Power Amplifier
PACKAGE/ORDERING INFORMATION
MODEL
SGM4866
ORDER NUMBER
SGM4866YTQ16G/TR
PACKAGE
DESCRIPTION
TQFN-3×3-16L
PACKAGE
OPTION
Tape and Reel, 3000
MARKING
INFORMATION
4866TQ
ABSOLUTE MAXIMUM RATINGS
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . -0.3V to (VCC) + 0.3V
Storage Temperature Range . . . . . . . . . . . . . .-65℃ to +150℃
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . 150℃
Operating Temperature Range . . . . . . . . . . . . . .-40℃ to +85℃
Lead Temperature Range (Soldering 10sec)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260℃
ESD Susceptibility
HBM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000V
MM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute Maximum rating conditions for extended
periods may affect device reliability.
PIN CONFIGURATION (TOP VIEW)
GND SHDN GND GND
16 15 14 13
+OUTA 1
12 +OUTB
V_CC 2
-OUTA 3
GND
11 VCC
10 -OUTB
INA 4
9 INB
5
6
7
8
GND GND GND BP
TQFN-3×3-16L
CAUTION
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends
that all integrated circuits be handled with appropriate
precautions. Failure to observe proper handling and
installation procedures can cause damage. ESD damage
can range from subtle performance degradation to complete
device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary
without notice at any time. Please contact SGMICRO sales
office to get the latest datasheet.
SG Micro Corp
2
www.sg-micro.com