SGM3799 Datasheet, PDF (2/12 Pages) SG Micro Corp – DPDT Analog Switch

SGM3799
0.5Ω, Low Voltage
Dual, DPDT Analog Switch
PACKAGE/ORDERING INFORMATION
MODEL
SGM3799
PACKAGE
DESCRIPTION
TQFN-2.6×1.8-16L
SPECIFIED
TEMPERATURE
RANGE
-40℃ to +85℃
ORDERING
NUMBER
SGM3799YTQA16/TR
PACKAGE
MARKING
GC
XXXXX
PACKING
OPTION
Tape and Reel, 3000
NOTE: XXXXX = Date Code and Vendor Code.
ABSOLUTE MAXIMUM RATINGS
V₊ to GND...................................................................0V to 4.6V
Analog, Digital Voltage Range ⁽¹⁾................. -0.3V to (V+) + 0.3V
Continuous Current NO, NC, or COM ...........................±200mA
Peak Current NO, NC, or COM ......................................±350mA
Operating Temperature Range............................-40℃ to +85℃
Junction Temperature........................................................150℃
Storage Temperature Range..............................-65℃ to +150℃
Lead Temperature (Soldering, 10s) ................................. 260℃
ESD Susceptibility
HBM................................................................................. 4000V
MM..................................................................................... 400V
NOTES:
1. Signals on NC, NO, or COM or IN_X exceeding V₊ will be
clamped by internal diodes. Limit forward diode current to
maximum current ratings.
2. Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
SG Micro Corp
2
www.sg-micro.com