SGM3145 Datasheet, PDF (2/12 Pages) SG Micro Corp – 8-Channel PWM Dimming Charge Pump White LED Driver

SGM3145
8-Channel PWM Dimming
Charge Pump White LED Driver
PACKAGE/ORDERING INFORMATION
MODEL
SGM3145
ORDER NUMBER
SGM3145YTQG20G/TR
PACKAGE
DESCRIPTION
TQFN-3×3-20L
SPECIFIED
TEMPERATURE
RANGE
-40℃ to +85℃
PACKAGE
OPTION
Tape and Reel, 3000
MARKING
INFORMATION
SGM3145QG
ABSOLUTE MAXIMUM RATINGS
V_IN to GND……………………...……….….....….….. -0.3V to 6V
The Other Pins to GND……………….………....….. -0.3V to VIN
Power Dissipation, P_D @ T_A = 25℃
TQFN-3×3-20L………………………………………………1.48W
Storage Temperature Range……….…………..-65℃ to +150℃
Junction Temperature…………………………………….....150℃
Operating Temperature Range...…………...……-40℃ to +85℃
Lead Temperature (Soldering 10 sec)
…………………………………..…..………......….….…….. 260℃
ESD Susceptibility
HBM…………………………………………………………...2000V
MM………………………………………….……………..……200V
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage
because very small parametric changes could cause the device
not to meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
SG Micro Corp
2
www.sg-micro.com