SAW8WA2A Datasheet, PDF (22/23 Pages) Seoul Semiconductor – White colored SMT package

10. Precaution for use
(1) Storage
To avoid the moisture penetration, we recommend storing SSC LEDs in a dry box
with a desiccant . The recommended storage temperature range is 5C to 30C and a maximum
humidity of RH50%.
(2) Use Precaution after Opening the Packaging
Use proper SMD techniques when the LED is to be soldered dipped as separation of the lens
may affect the light output efficiency.
Pay attention to the following:
a. Recommend conditions after opening the package
- Sealing
- Temperature : 5 ~ 40℃ Humidity : less than RH30%
b. If the package has been opened more than 4 week(MSL_2a) or the color of the
desiccant changes, components should be dried for 10-12hr at 60±5℃
(3) Do not apply mechanical force or excess vibration during the cooling process to normal
temperature after soldering.
(4) Do not rapidly cool device after soldering.
(5) Components should not be mounted on warped (non coplanar) portion of PCB.
(6) Radioactive exposure is not considered for the products listed here in.
(7) Gallium arsenide is used in some of the products listed in this publication. These products
are dangerous if they are burned or shredded in the process of disposal. It is also dangerous to
drink the liquid or inhale the gas generated by such products when chemically disposed of.
(8) This device should not be used in any type of fluid such as water, oil, organic solvent and
etc. When washing is required, IPA (Isopropyl Alcohol) should be used.
(9) When the LEDs are in operation the maximum current should be decided after measuring
the package temperature.
(10) LEDs must be stored properly to maintain the device. If the LEDs are stored for 3 months
or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should
be used for storage.
(11) The appearance and specifications of the product may be modified for improvement
without notice.
(12) Long time exposure of sunlight or occasional UV exposure will cause lens discoloration.
(13) VOCs (Volatile organic compounds) emitted from materials used in the construction of
fixtures can penetrate silicone encapsulants of LEDs and discolor when exposed to heat and
photonic energy. The result can be a significant loss of light output from the fixture.
Knowledge of the properties of the materials selected to be used in the construction of fixture_Rs_EV.02
can help prevent these issues.
Jan 2013
www.seoulsemicon.com
22
서식번호 : SSC-QP-7-07-12 (Rev.01)