SMJE-3V08W1P3_13 Datasheet, PDF (21/21 Pages) Seoul Semiconductor – Acrich2 - 220V 8.7W Bulb Connects directly to AC line voltage

RoHS
13. Handling with regards to static electricity
• The Acrich2 modules use an integrated circuit (IC) which can be damaged
when exposed to static electricity. Please handle using equipment that
prevents static electricity. Do not touch unless ESD protection is used.
• The Acrich2 modules should also not be installed in end equipment with out
ESD protection.
14. Storage before use
• Do not impact or place pressure on this product because even a small
amount of pressure can damage the product. The product should also not be
placed in high temperatures, high humidity or direct sunlight since the device is
sensitive to these conditions.
(1) When storing devices for a long period of time before usage, please
following these guidelines:
* The devices should be stored in the anti-static bag that it was shipped in
from Seoul-Semiconductor with opening.
* If the anti-static bag has been opened, re-seal preventing air and moisture
from being present in the bag.
15. Guidelines for properly working with Acrich modules.
• Discharge the lighting system a minimum of 2-3 times prior to working
with the module.
• Use only properly rated test equipment and tools for the rated voltage
and current of the product being tested.
• It is strongly suggested to wear rubber insulated gloves and rubber bottom shoes.
• Do not wear any conductive items (such as jewelry) which could accidentally
contact electric circuits.
• Perform several tests with power off and the lighting system unplugged.
• Faults, lightning, or switching transients can cause voltage surges in excess
of the normal ratings.
• Internal component failure can cause excessive voltages.
• Stored or residual electricity in long wire could be hazardous.
• Make sure proper discharge prior to starting work.
21