|
SMJE-3V08W1P3_13 Datasheet, PDF (20/21 Pages) Seoul Semiconductor – Acrich2 - 220V 8.7W Bulb Connects directly to AC line voltage | |||
|
◁ |
11. Cautions for use
RoHS
⢠Please review the Acrich2 Module Application Note for porper protective
circuitry usage
⢠Please note, Acrich products run off of high voltage, therefore caution should be
taken when working near Acrich products.
⢠DO NOT touch any of the circuit board, components or terminals with body or
metal while circuit is active.
⢠Please do not add or change wires while Acrich circuit is active
⢠Long time exposure to sunlight or UV can cause the lens to discolor.
⢠Please do not use adhesives to attach the LED that outgas organic vapor.
⢠Please do not use together with the materials containing Sulfur.
⢠Please do not assemble in conditions of high moisture and/or oxidizing gas such
as Cl, H2S,NH3,SO2,NOX,etc.
⢠Please do not make any modification on module.
⢠Please be cautious when soldering to board so as not to create a short between
different trace patterns.
12. Handling of silicone resin for LEDs
⢠Acrich series is encapsulated with silicone resin for high optical efficiency.
⢠Please do not touch the silicone resin area with sharp objects such as
pincette(tweezers).
⢠Finger prints on silicone resin area may affect the performance.
⢠Please store LEDs in covered containers to prevent dust accumulation as this
may affect performance.
⢠Excessive force more than 3000gf to the silicone lens can result in fatal or
permanent damage with LEDs.
⢠Please do not cover the silicone resin area with any other resins such as
epoxy, urethane, etc.
20
|
▷ |