SMJC-3V08W2P4 Datasheet, PDF (13/13 Pages) Seoul Semiconductor – Acrich2 - 8.7W Candle Connect using a AIC directly to AC power

11. Guidelines for Acrich module work
• Discharge the lighting system minimum 2~3 times prior to starting work.
• Use only the tested instruments, and insulated tools rated for the voltage and current
specified.
• Wear rubber made gloves and rubber bottom shoes or sneakers.
• Do not wear any conductive items (such as jewelry) which could accidentally contact
electric circuits.
• Perform several tests with power off and the lighting system unplugged.
• Faults, lightning, or switching transients can cause voltage surges in excess of the
normal ratings.
• Internal component failure can cause excessive voltages.
• Stored or residual electricity in long wire could be hazardous. Make sure proper
discharge prior to starting work.
Rev. 04
Mar. 2013
13
www.Acrich.com