SMJC-3V08W2P4 Datasheet, PDF (11/13 Pages) Seoul Semiconductor – Acrich2 - 8.7W Candle Connect using a AIC directly to AC power

7. Usage precautions
• Please review the Acrich2 Module Application Note for protective circuitry
component usage.
•Please note, the Acrich products run on high voltage so use caution when near
the device which the circuit is active.
•DO NOT touch any of the circuit board, components or terminals with body or
metal while circuit is active.
•Please do not add or change wires while Acrich circuit is active
• Long time exposure of sunlight or occasional UV exposure will cause lens
discoloration.
• Please do not use adhesives to attach the LED that outgas organic vapor.
• Please do not use together with the materials containing Sulfur
• Please do not assemble under the condition of moisture and oxidizing gas in the
air(Cl, H2S,NH3,SO2,NOX,etc)
• Please do not make any modification on module.
• Please be cautious as soldering in order to avoid short between different
patterns.
8. Handling of silicone resin for LEDs
•Acrich series is encapsulated with silicone resin for high optical efficiency.
•Please do not touch the silicone resin area with sharp objects such as
pincette(tweezers).
•Finger prints on silicone resin area may affect the performance.
•Please store LEDs in covered containers as it is dust sensitive.
•Excessive force more than 3000gf to the silicone lens can result in fatal or permanent
damage with LEDs.
•Please do not cover the silicone resin area with any other resins such as epoxy, urethane,
etc.
Rev. 04
Mar. 2013
11
www.Acrich.com