914111051000 Datasheet, PDF (2/4 Pages) Sensortechnics GmbH – 10 mm switching soleniod valve

Ten-X^®
10 mm switching soleniod valve
PERFORMANCE CHARACTERISTICS
Part no.
Pressure Minimum flow
914-1...
(silicone elastomer)
914-2...
(Viton elastomer)
0...6 psi
0...6 psi,
0...20 psi,
0...30 psi
8 lpm @ 6 psi,
22 lpm @ 30 psi
Orifice sizes/
Equivalent C_V1
0.060" (1.52 mm)/
0.042 C_V
Leak rate² Response
≤0.016 sccm
<5 ms
cycling
≤0.2 sccm
<20 ms
cycling
FLOW CURVES (typical air flow at 24 °C)³
6 psi devices
20 psi and 30 psi
devices
Notes:
1 _{The CV value is the volume flow in US gallons/min under specific flow conditions and describes the relative flow capacity of a}
valve. If several valves with the same nominal diameter are compared, the valve with
dynamics design. The equivalent european measure is the k_V value expressed in m³/h
the highest C_V
(k_V = 0.86 C_V).
value
has
the
best
flow
2 _{sccm denotes Standard Cubic Centimeters per Minute. It is a unit for the flow rate at standard conditions of temperature and}
pressure. 1000 sccm = 1 slpm.
3 _{slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure.}
1 slpm = 1000 sccm.
E / 11260 / A
2/4
www.sensortechnics.com