914111051000 Datasheet, PDF (1/4 Pages) Sensortechnics GmbH – 10 mm switching soleniod valve

Ten-X^®
10 mm switching soleniod valve
FEATURES
· 3-way, 2 position (NO, NC & Distributor)
· Optional ‘Hit and Hold’ drive electronics
using pulse width modulation (PWM)
at 25-32 kHz
· Minimum flow of 8 lpm @ 6 psi and
22 lpm @ 30 psi
· 10 mm single piece body design
· Barbed pressure ports allow for direct
tubing or manifold assemblies
· RoHS compliant
MEDIA COMPATIBILITY
Non-reactive gases
WETTED MATERIALS
PHYSICAL PROPERTIES
PBT (polybutylene terephthalate) glass filled;
430FR series stainless steel; 302 series stainless
steel; Viton (FKM) or silicone elastomer
Operating environment (continuous duty) 0 to 50 °C
Storage temperature
-40 to 70 °C
ELECTRICAL
Power
Voltage
Electrical connections
0.5 W
5, 12, 24 V_DC
PC pins
Spacing
10 mm (centerline)
Porting
Barbs for 1.98 mm (0.078 in) I.D. tubing
or manifold mount with gasket
Weight
without electronics
with electronics
10.7 g
12 g
Internal volume
0.131 cm³ (0.0080 in³)
Ten-X is a registered trademark of Parker Hannifin Corporation.
E / 11260 / A
1/4
www.sensortechnics.com