10700441 Datasheet, PDF (3/3 Pages) Schurter Inc. – TOUCHSCREEN

5.3 Exposure to constant temperature and humidity
Touch panel is put into a test machine at the condition of 60 , 90%RH for 120 hours. Then it is left at the room
temperature for 24 hours or more. The measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
5.4 Thermal Shock
Touch panel is put into a test machine at the condition of -20 for 30 minutes, and then 80 for 30 minutes. The
process is repeated by 10 cycles. Then it is left at the room temperature for 24 hours or more. The measurement
must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
6. Durability test:
6.1 Finger touches
Touch panel is hit 36 millions times with a silicone rubber of R8 finger, hitting rate is by 250g at 2 times per
second. The measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
6.2 Stylus writing
Touch panel is drawn by R0.8 Derlin stylus pen, at 250g forces, repeat one inch by 100K times.
The measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
7. Optical Performance:
7.1 Optical inspection method and optical defect standards refer to document. A001-2 Touch Screen Optical Quality
Standard.
7.2 Outside to Active Area : any optical defected in this area need to be ignored if no effected to touch screen function.
7.3 Glass defects such as edge chips and scratches refer to A001-2 Touch Screen Optical Quality Standard.
7.4 Others
Always store the touch screen in its original shipping container under normal conditions (20~25°C, 65% RH)
Changes that contribute to technical improvement are subject to alternations
2002 Datum Name
Bearb.
Gepr.
Vert.
24.10.
24.10.
Maurer
Maurer
TOUCHSCREEN
12,26“, 5-Wire
AMT-02501-01
EDV-Datasheet
SPECIFICATIONS OF ANALOG RESISTIVE
PET-ON-GLASS TOUCH SCREEN
don’t change manually
Manufactured by Apex Material Technology Corp.
a ^{500004569 18.08.2006}
Maurer
Zu Änd. Datum Name
D 79346 Endingen
H 1070.0441
Blatt 3 von 3 Index: a