10700441 Datasheet, PDF (2/3 Pages) Schurter Inc. – TOUCHSCREEN

1.3 Input Method and Activation Force
Input Method
1.6mm dia. Delrin stylus
16mm dia. Silicon "finger"
Average Activation Force
10~70 grams
10~ 80 grams
2. Typical Optical Characteristics
2.1 Visible Light Transmission: >80%
2.2 Haze: 3~7% (JIS K-7105)
3. Electrical Specifications
3.1 Operating Voltage: 5.5V or less
3.2 Contact current: 20mA (maximum)
3.3 Circuit close resistance:
30~300Ω
3.4 Circuit open resistance: > 10MΩ at 25VDC
3.5 Contact bounce: < 15ms
3.6 Linear Test : <1.5 %
4. Environment Specification
4.1 Operating Temperature - 10° C ~ + 60° C Humidity less than 90% RH
4.2 Storage Temperature - 20° C ~ + 80° C at Ambient Humidity
5. Reliability Test
5.1 Exposure to high temperature
Touch panel is put into a test machine at the condition of 80 for 120 hours. Then it is left at the room temperatu
for 24 hours or more. The measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
5.2 Exposure to low temperature
Touch panel is put into a test machine at the condition of -20 for 120 hours. Then it is left at the room temperature
for 24 hours or more. The measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
Changes that contribute to technical improvement are subject to alternations
2002 Datum Name
Bearb.
Gepr.
Vert.
24.10.
24.10.
Maurer
Maurer
TOUCHSCREEN
12,26“, 5-Wire
AMT-02501-01
EDV-Datasheet
SPECIFICATIONS OF ANALOG RESISTIVE
PET-ON-GLASS TOUCH SCREEN
don’t change manually
Manufactured by Apex Material Technology Corp.
a ^{500004569 18.08.2006}
Maurer
Zu Änd. Datum Name
D 79346 Endingen
H 1070.0441
Blatt 2 von 3 Index: a