LC8900KQ Datasheet, PDF (9/12 Pages) Sanyo Semicon Device – Digital Audio Interface Receiver

LC8900KQ
(2) Data output mode
Bits DO0 to DO4 of the DO signal have the following meanings show in the tables below.
DO3 = L Copy inhibited
DO3 = H Copy not inhibited
DO1
L
L
H
DO2
L
H
H
Sampling frequency selection
44.1 kHz
48 kHz
32 kHz
• 6 ms or longer is required to read data after the ERROR pin is changed to L. Take at least 6 ms between data read out.
Any codes when DO1 is high and DO2 is low is invalid in other conditions than this.
Timing Chart
No. 4128-9/12