English
Language : 

CPH5870 Datasheet, PDF (5/5 Pages) Sanyo Semicon Device – N-Channel Silicon MOSFET, Schottky Barrier Diode, General-Purpose Switching Device Applications
CPH5870
PF(AV) -- IO
600
(1)Rectangular wave θ=60°
(2)Rectangular wave θ=120°
500 (3)Rectangular wave θ=180°
(4)Sine wave θ=180°
400
Rectangular
wave
300
(1)
θ
200
360°
[SBD]
(4) (3)
(2)
Sine wave
100
180°
0
360°
0
100
200
300
400
500
600
Average Output Current, IO -- A ID00341
IFSM -- t
[SBD]
7
Current waveform 50Hz sine wave
6
IS
5
20ms
t
4
2
100
7
5
3
2
10
7
5
3
1.0
3
2
1
0
7 0.01
23
5 7 0.1 2 3
Time, t -- s
5 7 1.0 2 3
ID00343
C -- VR
[SBD]
f=1MHz
23
5 7 10
23
Reverse Voltage, VR -- V
5 7 100
ID00342
Note on usage : Since the CPH5870 is a MOSFET product, please avoid using this device in the vicinity
of highly charged objects.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party’s
intellectual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides information as of May, 2008. Specifications and information herein are subject
to change without notice.
PS No. A1161-5/5