English
Language : 

LC87F1M16A Datasheet, PDF (3/32 Pages) Sanyo Semicon Device – 8-bit 1-chip Microcontroller with Full-Speed USB
LC87F1M16A
„Full Duplex UART
• UART1
(1) Data length : 7/8/9 bits selectable
(2) Stop bits : 1 bit (2 bits in continuous transmission mode)
(3) Baud rate : 16/3 to 8192/3 tCYC
• SCUART
(1) Data length : 7/8 bits selectable
(2) Stop bits : 1/2 bits selectable
(3) Parity bits : None/even parity/odd parity
(4) Baud rate : 8/3 to 8192/3 tCYC
(5) LSB first/MSB first mode delectable
(6) Smartcard interface function
„AD Converter: 12 bits × 20 channels
• 12-/8-bit resolution selectable AD converter
„PWM: Multifrequency 12-bit PWM × 2 channels
„USB Interface (function controller)
(1) Compliant with USB 2.0 Full-Speed
(2) Supports a maximum of 6 user-defined endpoints.
Endpoint
Transfer
Type
Control
Bulk
Interrupt
Isochronous
Max. payload
EP0
EP1
EP2
EP3
EP4
EP5
EP6
{
-
-
-
-
-
-
-
{
{
{
{
{
{
-
{
{
{
{
{
{
-
{
{
{
{
{
{
64
64
64
64
64
64
64
„Watchdog Timer
• Internal counter watchdog timer
(1) Generates an internal reset on an overflow occurring in the timer running on the low-speed RC oscillator clock
(approx. 30kHz) or subclock.
(2) Operating mode at HALT/HOLD mode is selectable from 3 modes
(continue counting/suspend operation/suspend counting with the count value retained)
„Clock Output Function
(1) Can output a clock with a clock rate of 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, or 1/64 of the source oscillator clock selected
as the system clock.
(2) Can output the source oscillation clock for the subclock.
No.A1909-3/32