|
LC87BK08A Datasheet, PDF (20/27 Pages) Sanyo Semicon Device – 8-bit 1-chip Microcontroller | |||
|
◁ |
LC87BK08A/06A/04A
Continued from preceding page.
Parameter
Symbol
Normal mode
consumption
current
(Note 9-1)
(Note 9-2)
IDDOP(10)
IDDOP(11)
Pin/
Remarks
Conditions
VDD[V]
min
VDD1
⢠FsXâtal=32.768kHz crystal oscillation mode
⢠System clock set to 32.768kHz side
2.7 to 5.5
⢠Internal low speed and medium speed RC
oscillation stopped.
⢠Frequency variable RC oscillation stopped.
⢠1/2 frequency division ratio
2.7 to 3.6
⢠FsXâtal=32.768kHz crystal oscillation mode
⢠System clock set to 32.768kHz side
5.0
⢠Internal low speed and medium speed RC
oscillation stopped.
⢠Frequency variable RC oscillation stopped.
⢠1/2 frequency division ratio
3.3
⢠Ta=-10 to +50°C
Specification
typ
max
unit
24
82
8.2
35
μA
24
64
8.2
23
HALT mode
consumption
current
(Note 9-1)
(Note 9-2)
IDDHALT(1)
⢠HALT mode
⢠FmCF=12MHz ceramic oscillation mode
⢠System clock set to 12MHz side
⢠Internal low speed and medium speed RC
oscillation stopped.
⢠Frequency variable RC oscillation stopped.
⢠1/1 frequency division ratio
2.7 to 5.5
2.7 to 3.6
2.0
3.7
0.99
1.7
IDDHALT(2)
⢠HALT mode
⢠CF1=24MHz external clock
⢠System clock set to CF1 side
⢠Internal low speed and medium speed RC
oscillation stopped.
⢠Frequency variable RC oscillation stopped.
⢠1/2 frequency division ratio
3.0 to 5.5
3.0 to 3.6
2.0
4.7
1.2
2.2
IDDHALT(3)
⢠HALT mode
⢠FmCF=10MHz ceramic oscillation mode
⢠System clock set to 10MHz side
⢠Internal low speed and medium speed RC
oscillation stopped.
⢠Frequency variable RC oscillation stopped.
⢠1/1 frequency division ratio
2.7 to 5.5
2.7 to 3.6
1.6
3.4
0.89
1.6
IDDHALT(4)
⢠HALT mode
⢠FmCF=4MHz ceramic oscillation mode
⢠System clock set to 4MHz side
⢠Internal low speed and medium speed RC
oscillation stopped.
⢠Frequency variable RC oscillation stopped.
⢠1/1 frequency division ratio
2.7 to 5.5
2.7 to 3.6
mA
1.0
2.5
0.4
0.91
IDDHALT(5)
⢠HALT mode
⢠CF oscillation low amplifier size selected.
(CFLAMP=1)
⢠FmCF=4MHz ceramic oscillation mode
⢠System clock set to 4MHz side
⢠Internal low speed and medium speed RC
oscillation stopped.
⢠Frequency variable RC oscillation stopped.
⢠1/4 frequency division ratio
2.7 to 5.5
2.7 to 3.6
0.6
1.4
0.27
0.57
IDDHALT(6)
⢠HALT mode
⢠FsXâtal=32.768kHz crystal oscillation mode
⢠Internal low speed RC oscillation stopped.
2.7 to 5.5
0.29
0.87
⢠System clock set to internal medium speed
RC oscillation
⢠Frequency variable RC oscillation stopped.
2.7 to 3.6
0.19
0.40
⢠1/2 frequency division ratio
Note9-1: Values of the consumption current do not include current that flows into the output transistors and internal
pull-up resistors.
Note9-2: The consumption current values do not include operational current of LVD function if not specified.
Continued on next page.
No.A1984-20/27
|
▷ |