LV24030LP Datasheet, PDF (2/14 Pages) Sanyo Semicon Device – Bi-CMOS IC FM Tuner IC for Small Portable Equipment

LV24030LP
Continued from preceding page.
• In combination with the host, fast, low power operation of present mode, manual search, automatic search
and automatic present store are possible
• Covers all Japanese, European and US bands
• Built in voltage stabilizer
• Stereo pilot signal Canceller
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Maximum supply voltage
VCC max Analog block supply voltage
VDD max Digital block supply voltage
Digital input voltage
VIN1 max Clock, Data, NR_W
VIN2 max External_clk_in
Allowable power dissipation
Pd max Ta≤70°C, Mounted on a specified board *
Operating temperature
Topr
Storage temperature
Tstg
Note: Mounted on a specified board: 40mm×50mm×0.8mm, glass epoxy
Ratings
Unit
5.0
V
4.5
V
VDD+0.3
V
VDD+0.3
V
140
mW
-20 to +70
°C
-40 to +125
°C
Operating Condition at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
Recommended supply voltage
VCC
Analog block supply voltage
3.0
V
VDD
Digital block supply voltage
3.0
V
Operating supply voltage range
VCC op
2.6 to 4.0
V
VDD op
2.5 to 4.0
V
VIO op
Interface voltage
1.8 to 4.0
V
Note: The VIO application voltage must be either equivalent to VDD or the VDD value or less. (VIO ≤ VDD)
Interface Block Allowable Operation Range at Ta = -20 to +70°C, VSS = 0V
Parameter
Symbol
Conditions
Supply voltage
VDD
Digital block input
(including the external clock)
VIH
High level input voltage range
VIL
Low level input voltage range
Digital block output
IOL
Output current at Low level
Clock input operating frequency
VOL
fclk
Output voltage at Low level IOL=2mA
(Pin5) clock frequency for 3wire_bus
External clock operating frequency
fclk_ext (Pin12) clock frequency for external input
Note: External clock input (pin12) allows also input of the sine wave signal.
min
2.5
0.7VIO
0
2.0
32k
Ratings
typ
max
4.0
VIO
0.6
0.6
0.7
20M
Unit
V
V
V
mA
V
MHz
Hz
No.A1003-2/14