LV24030LP Datasheet, PDF (1/14 Pages) Sanyo Semicon Device – Bi-CMOS IC FM Tuner IC for Small Portable Equipment

Ordering number : ENA1003
LV24030LP
Bi-CMOS IC
FM Tuner IC for Small Portable Equipment
Overview
The LV24030LP is FM tuner IC’s that requires absolutely no external components for tuning.
They incorporates not only the FM tuner functions as well in a compact VQLP package with dimensions of only
4.0×4.0×0.8mm.
These IC’s are simply ideal for incorporating FM tuner functions into mobile phones and other small mobile set where
space is always at a premium.
Functions
• FM FE
• FM IF
• MPX stereo decoder
• Tuning
• Standby
Features
• No external components
• No alignments necessary
• Fully integrated low IF (140kHz) selectivity and demodulation
• Built in adjacent channel interface total reduction (no 114kHz, no 190kHz)
• Due to new tuning concept, the tuning is independent of the channel spacing
• Very high sensitivity due to integrated low noise RF input amplifier
• Very low power standby mode. No power switch circuitry required
• MPX output for RDS application
• 3-wire bus interface (Date, Clock, NR-W)
• Digital AFC-Tuner locks to frequency after tuning sequence
• 4 level programmable Soft Mute
• 4 level Programmable Stereo Blend
Continued on next page.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
13008 TI IM 20080124-S00004 No.A1003-1/14