LC868116 Datasheet, PDF (19/28 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller with 16/12/08K-Byte ROM and 640-Byte RAM On Chip

LC868116/12/08A
Parameter
Symbol Pins
Conditions
Current
IDDHALT(1)
drain in
HALT mode
(Note 2)
IDDHALT(2)
IDDHALT(3)
IDDHALT(4)
IDDHALT(5)
IDDHALT(6)
IDDHALT(7)
IDDHALT(8)
IDDHALT(9)
VDD
•HALT mode
•FmCF=12MHz
Ceramic resonator
oscillation
•FsXtal=32.768kHz
crystal oscillation
•System clock :
12MHz
•Internal RC
oscillation stops
•HALT mode
•FmCF=6MHz
Ceramic resonator
oscillation
•FsXtal=32.768kHz
crystal oscillation
•System clock :
6MHz
•Internal RC
oscillation stops
•HALT mode
•FmCF=3MHz
Ceramic resonator
oscillation
•FsXtal=32.768kHz
crystal oscillation
•System clock :
3MHz
•Internal RC
oscillation stops
•HALT mode
•FmCF=0Hz
(when oscillation
stops)
•FsXtal=32.768kHz
crystal oscillation
•System clock :
RC oscillation
Ratings
unit
OCR7 VDD[V] min. typ. max.
0 4.5-6.0
5.0 14 mA
1 4.5-6.0
5.0 14
0 4.5-6.0
1
0 2.5-4.5
2.3 7
4.5 15
0.8 4
0 4.5-6.0
1
0 2.5-4.5
1
400 1600
600 2400
200 1300
350 1500
IDDHALT(10)
•HALT mode
0 4.5-6.0
25 100 µA
IDDHALT(11)
•FmCF=0Hz
1
36 140
IDDHALT(12)
IDDHALT(13)
(when oscillation
stops)
•FsXtal=32.768kHz
0 2.5-4.5
1
8 55
12 85
crystal oscillation
•System clock :
32.768kHz
•Internal RC
oscillation stops
Current
IDDHOLD(1) VDD HOLD mode
4.5-6.0
0.05 30
drain in
HOLD mode
IDDHOLD(2)
2.5-4.5
0.02 20
(Note 2)
(Note 2) The currents of the output transistors, pull-up transistors and the LCD bleeder resistors are ignored.
Refer to figure 7.
No.6724-19/28