LC868116 Datasheet, PDF (15/28 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller with 16/12/08K-Byte ROM and 640-Byte RAM On Chip

LC868116/12/08A
3. Electrical Characteristics at Ta=-30°C to +70°C, VSS=0V
Parameter
Input high
current
Symbol
Pins
IIH(1)
•Ports 1,2,3,4,5
•Port 0 without
pull-up MOS Tr.
IIH(2)
Port 7 without
pull-up MOS Tr.
Input low
current
IIH(3)
IIL(1)
RES
•Ports 1,2,3,4,5
•Port 0 without
pull-up MOS Tr.
IIL(2)
Port 7 without
pull-up MOS Tr.
Output high
voltage
Output low
voltage
IIL(3)
VOH(1)
VOH(2)
VOH(3)
VOH(4)
VOL(1)
VOL(2)
VOL(3)
RES
Port 0 of
CMOS output
•Ports 1,2,3,4,5 of
CMOS output
•ADLC, EROE
•Ports 0,1,2,3,4,5
•ADLC, EROE
Pull-up MOS
Tr. resistor
Hysteresis
voltage
VOL(4)
VOL(5)
Rpu
VHIS
Pin capacitance CP
Port 70
•Ports 0,1,2,3,4,5
•Port 7
•Ports 0,1,2,3,4,5
•Port 7
• RES
All pins
Conditions
•Output disable
•Pull-up MOS Tr. OFF
•VIN=VDD
(including the off-
leak current of the
output Tr.)
•Output Nch Tr. OFF
•VIN=VDD
(including the off-
leak current of the
output Tr.)
VIN=VDD
•Output disable
•Pull-up MOS Tr. OFF
•VIN=VSS
(including the off-
leak current of the
output Tr.)
•Output Nch Tr. OFF
•VIN=VSS
(including the off-
leak current of the
output Tr.)
VIN=VSS
IOH=-10mA
IOH=-1mA
IOH=-1.0mA
IOH=-0.1mA
Ratings
VDD[V] min.
typ.
2.5-6.0
2.5-6.0
2.5-6.0
2.5-6.0
-1
2.5-6.0
-1
2.5-6.0
4.5-6.0
2.5-6.0
4.5-6.0
2.5-6.0
-1
VDD-2.2
VDD-0.4
VDD-1
VDD-0.5
max. ^unit
1 µA
1
1
V
IOL=10mA
IOL=1.6mA
•IOL=1.0mA
•The current of any
measurement pin is
not over 1mA.
IOL=1mA
IOL=0.5mA
VOH=0.9VDD
Output disable
4.5-6.0
4.5-6.0
2.5-6.0
4.5-6.0
2.5-6.0
4.5-6.0
2.5-4.5
2.5-6.0
1.5
0.4
0.4
0.4
0.4
15
40
70 kΩ
25
60
120
0.1VDD
V
•f=1MHz
•Unmeasurement
terminals for the
input are set to
VSS level.
•Ta=25°C
2.5-6.0
10
pF
No.6724-15/28