LC86P6548 Datasheet, PDF (18/22 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller with One-Time Programmable PROM

LC86P6548
Table 1. Ceramic resonator oscillation recommended constant (main-clock)
Oscillation type
Maker
Oscillator
C1
C2
6MHz ceramic resonator
Murata
oscillation
Kyocera
3MHz ceramic resonator
Murata
oscillation
Kyocera
* Both C1 and C2 must be use K rank (±10%) and SL characteristics.
Table 2. Crystal oscillation guaranteed constant (sub-clock)
Oscillation type
Maker
Oscillator
32.768kHz crystal oscillation
C3
C4
Rd
Rf
* Both C3 and C4 must be use J rank (±5%) and CH characteristics.
(Not in need of high precision, use K rank (±10%) and SL characteristics.)
(Notes) • Please place the oscillation-related parts as close to the oscillation pins as possible with the shortest
possible pattern length since the circuit pattern affects the oscillation frequency.
• If you use other oscillators herein, we provide no guarantee for the characteristics.
CF1
CF2
CF
C1
C2
Figure 1 Main-clock circuit
Ceramic resonator oscillation
XT1
C3
Rf
X’tal
XT2
Rd
C4
Figure 2 Sub-clock circuit
Crystal oscillation
No.6690-18/22