LC86P6548 Datasheet, PDF (13/22 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller with One-Time Programmable PROM

LC86P6548
3. Electrical Characteristics at Ta=-30°C to +70°C, VSS1=VSS2=0V
Parameter Symbol
Pins
Input high
current
IIH(1) Ports 0,3 at open
drain output
IIH(2)
•Ports 1,3
•Port 0 without
pull-up MOS Tr.
IIH(3) •Ports 70,71,72,73
•Port 8
Input low
current
IIH(4)
IIH(5)
IIH(6)
IIL(1)
RES
Ports 74 ,75
•S32 to S51 without
pull-down resistor
•Ports 1,3
•Port 0 without
pull-up MOS Tr.
IIL(2) •Ports 70,71,72,73
•Port 8
Output high
voltage
IIL(3) RES
IIL(4) Ports 74 ,75
VOH(1) Ports 0,1,3 of
VOH(2) CMOS output
VOH(3) S0/T0 to S15/T15
VOH(4)
VOH(5) S16 to S51
VOH(6)
Output low
voltage
Pull-up MOS
Tr. resistor
VOL(1) Ports 0,1,3
VOL(2)
VOL(3) Port 70
VOL(4) •Ports 71,72,73
•Ports 84,85,86,87
Rpu Ports 0,1,3
Conditions
•Output disable
•VIN=13.5V
(including off-leakage
current of the output Tr.)
•Output disable
•Pull-up MOS Tr. OFF.
•VIN=VDD
(including off-leakage
current of the output Tr.)
•Output disable
•VIN=VDD
(including off-leakage
current of the output Tr.)
VIN=VDD
VIN=VDD
•Output P-channel Tr. OFF.
•VIN=VDD
•Output disable
•Pull-up MOS Tr. OFF.
•VIN=VSS
(including off-leakage
current of the output Tr.)
•Output disable
•VIN=VSS
(including off-leakage
current of the output Tr.)
VIN=VSS
VIN=VSS
IOH=-1.0mA
IOH=-0.1mA
IOH=-20mA
•IOH=-1.0mA
•The current of any
unmeasurement pin is not
over 1mA.
IOH=-5mA
•IOH=-1.0mA
•The current of any
unmeasurement pins is not
over 1mA.
IOL=10mA
IOL=1.6mA
IOL=1mA
IOL=1.6mA
VOH=0.9VDD
VDD[V]
4.5 to 6.0
Ratings
min. typ.
4.5 to 6.0
4.5 to 6.0
4.5 to 6.0
4.5 to 6.0
4.5 to 6.0
4.5 to 6.0 -1
4.5 to 6.0 -1
4.5 to 6.0
4.5 to 6.0
4.5 to 6.0
4.5 to 6.0
4.5 to 6.0
4.5 to 6.0
-1
-1
VDD-1
VDD-0.5
VDD-1.8
VDD-1
4.5 to 6.0 VDD-1.8
4.5 to 6.0 VDD-1
4.5 to 6.0
4.5 to 6.0
4.5 to 6.0
4.5 to 6.0
4.5 to 6.0 15
40
unit
max.
5 µA
1
1
1
1
1
V
1.5
0.4
0.4
0.4
70 KΩ
Continue.
No.6690-13/22