LC86P5420 Datasheet, PDF (18/22 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller with the One-Time Programmable PROM

LC86P5420
Table 1. Ceramic resonator oscillation guaranteed constant (main-clock)
A kind of oscillation Producer
Oscillator
C1
C2
6MHz ceramic resonator Murata
CSA 6.00MG
33pF 33pF
oscillation
CST 6.00MGW
on chip
Kyocera
KBR-6.0MSA
33pF 33pF
PBRC 6.00A (chip type)
33pF 33pF
KBR-6.0MKS
on chip
PBRC 6.00B (chip type)
3MHz ceramic resonator Murata
CSA 3.00MG
33pF 33pF
oscillation
CST 3.00MGW
on chip
Kyocera
KBR-3.0MS
47pF 47pF
* Both C1 and C2 must use K rank (±10%) and SL characteristics.
Table 2. Crystal oscillation guaranteed constant (sub-clock)
A kind of oscillation Producer
Oscillator
C3
C4
32.768kHz crystal
Kyocera
KF-38G-13P0200
18pF 18pF
oscillation
* Both C3 and C4 must use J rank (±5%) and CH characteristics.
(It is about the application which is not in need of high precision. Use K rank (±10%) and
SL characteristics.)
Notes
•Since the circuit pattern affects the oscillation frequency, place the oscillation-related parts
as close to the oscillation pins as possible with the shortest possible pattern length.
•If you use other oscillators herein, we provide no guarantee for the characteristics.
CF1
CF2
C1
CF
C2
Figure 1. Main-clock circuit
Ceramic resonator oscillation
ILC00059
XT1
XT2
C3
X'tal
C4
Figure 2. Sub-clock circuit
Cryatal oscillation
ILC00065
No.6730-18/22