LC86P5420 Datasheet, PDF (13/22 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller with the One-Time Programmable PROM

LC86P5420
3. Electrical Characteristics at Ta= -- 30°C to +70°C, VSS=0V
Ratings
Parameter
Symbol
Pins
Conditions _{VDD [V] min.}
typ.
max. ^unit
Input high
IIH(1)
Ports 0, 3 of Open •Output disable 4.5 to 6.0
5
µA
current
drein output
•VIN=13.5V
(including off-leak
current of the
output Tr.)
IIH(2)
•Port 0 without •Output disable 4.5 to 6.0
1
pull-up MOS Tr. •Pull-up MOS Tr.
•Ports 1, 3
OFF.
•Ports 70, 71, 72, 73 •VIN=VDD
•Port 8
(including off-leak
current of the
output Tr.)
IIH(3)
RES
VIN=VDD 4.5 to 6.0
1
IIH(4)
Ports 74, 75
VIN=VDD 4.5 to 6.0
1
at using as port
Input low
IIL(1)
•Ports 1, 3,
•Output disable 4.5 to 6.0 -1
current
•Port 0 without •Pull-up MOS Tr.
pull-up MOS Tr. OFF.
•Ports 70, 71, 72, 73 •VIN=VSS
•Port 8
(including off-leak
current of the
output Tr.)
IIL(2)
RES
VIN=VSS
4.5 to 6.0 -1
IIL(3)
Ports 74, 75
VIN=VSS
4.5 to 6.0 -1
at using as port
Output high VOH(1) Ports 0, 1, 3
IOH=-1.0mA 4.5 to 6.0 VDD-1
V
voltage
of CMOS output
VOH(2)
•Ports 71, 72, 73 IOH=-0.1mA 4.5 to 6.0 VDD-0.5
•Ports 84, 85, 86, 87
Output low
VOL(1) Ports 0, 1, 3
IOL=10mA 4.5 to 6.0
1.5
voltage
VOL(2)
IOL=1.6mA 4.5 to 6.0
0.4
VOL(3) •Ports 71, 72, 73 IOL=1.6mA 4.5 to 6.0
0.4
•Ports 84, 85, 86, 87
VOL(4) Port 70
IOL=1.0mA 4.5 to 6.0
0.4
Pull-up MOS Rpu
•Ports 0, 1, 3
VOH=0.9 VDD 4.5 to 6.0 15
40
70 kΩ
Tr. resistor
•Ports 70, 71, 72, 73
•Ports 84, 85, 86, 87
Hysteresis
VHIS
•Port 1
Output disable 4.5 to 6.0
0.1VDD
V
voltage
•Ports 70, 71, 72, 73
•RES
Pin
CP
All pins
•f=1MHz
4.5 to 6.0
10
pF
capacitance
Unmeasurement
terminals for
input are set to
VSS level.
•Ta=25°C
No.6730-13/22