LC866548 Datasheet, PDF (17/21 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller

LC866548/40/32/28/24A
Parameter
Symbol
Pins
Conditions
Ratings
unit
VDD[V] min. typ. max.
Current
IDDHALT(1)
•HALT mode
4.5 - 6.0
5
14 mA
dissipation
•FmCF=6MHz
HALT mode
Ceramic resonator oscillation
(Note 4)
•FsXtal=32.768kHz
Crystal oscillation
•Internal RC oscillation stops.
•System clock : CF oscillation
•1/1 divided
IDDHALT(2)
•HALT mode
4.5 - 6.0
2.2
7
•FmCF=3MHz
Ceramic resonator oscillation
•FsXtal=32.768kHz
Crystal oscillation
•Internal RC oscillation stops.
•System clock : CF oscillation
•1/2 divided
IDDHALT(3)
•HALT mode
•FmCF=0Hz
4.5 - 6.0
400 1600 µA
(when oscillation stops)
•FsXtal=32.768kHz
Crystal oscillation
•System clock : RC oscilaltion
•1/2 divided
IDDHALT(4)
•HALT mode
4.5 - 6.0
25
100
•FmCF=0Hz
(when oscillation stops)
•FsXtal=32.768kHz
Crystal oscillation
•System clock :
Crystal oscilaltion
•Internal RC oscillation stops.
•1/2 divided
Current
IDDHOLD(1)
HOLD mode
4.5 - 6.0
0.05
30
µA
dissipation
HOLD
mode
(Note 4)
(Note 4) The currents of the output transistors and the pull-up MOS transistors are ignored.
Table 1. Ceramic resonator oscillation guaranteed constant (main clock)
Oscillation type
Maker
Oscillator
C1
C2
6MHz ceramic resonator
Murata
CSA6.00MG
33pF
33pF
oscillation
CST6.00MGW
on chip
Kyocera
KBR-6.0MSB
33pF
33pF
PBRC6.00A (chip type)
33pF
33pF
KBR-6.0MKC
PBRC6.00B (chip type)
on chip
3MHz ceramic resonator
oscillation
Murata
CSA3.00MG
CST3.00MGW
33pF
33pF
on chip
Kyocera
KBR-3.0MS
33pF
33pF
* Both C1 and C2 must be a K rank (±10%) and SL characteristics.
No.6700-17/21