LC866548 Datasheet, PDF (13/21 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller

LC866548/40/32/28/24A
3. Electrical Characteristics at Ta=-30°C to +70°C, VSS1=VSS2=0V
Parameter
Input high
current
Input low
current
Output high
voltage
Symbol
Pins
Conditions
Ratings
unit
VDD[V] min. typ. max.
IIH(1)
Ports 0, 3 of open •Output disable
4.5 - 6.0
5
µA
drain output
•VIN=13.5V
(including off-leak
current of the
output Tr.)
IIH(2)
•Port 0 without •Output disable
4.5 - 6.0
1
pull-up MOS Tr. •Pull-up MOS Tr.
•Ports 1, 3
OFF
•VIN=VDD
(including off-leak
current of the
output Tr.)
IIH(3)
•Ports70,71,72,73 •Output disable
4.5 - 6.0
1
•Port 8
•VIN=VDD
(including off-leak
current of the
output Tr.)
IIH(4)
RES
VIN=VDD
4.5 - 6.0
1
IIH(5)
Ports 74 , 75
VIN=VDD
4.5 - 6.0
1
IIH(6)
S16 to S51
•Output P-channel 4.5 - 6.0
1
without pull-down Tr. OFF
resistor (Ports C, •VIN=VDD
D, E, F,G)
IIL(1)
•Ports 1, 3
•Output disable
4.5 - 6.0 -1
µA
•Port 0 without •Pull-up MOS Tr.
pull-up MOS Tr. OFF
•VIN=VSS
(including off-leak
current of the
output Tr.)
IIL(2)
•Ports70,71,72,73 •Output disable
4.5 - 6.0 -1
•Port 8
•VIN=VSS
(including off-leak
current of the
output Tr.)
IIL(3)
RES
VIN=VSS
4.5 - 6.0 -1
IIL(4)
Ports 74 , 75
VIN=VSS
4.5 - 6.0 -1
VOH(1) Ports 0, 1, 3 of
IOH=-1.0mA
4.5 - 6.0 VDD-1
V
VOH(2) CMOS output
IOH=-0.1mA
4.5 - 6.0 VDD-0.5
VOH(3) S0/T0 to S15/T15 IOH=-20mA
4.5 - 6.0 VDD-1.8
VOH(4)
•IOH=-1mA
4.5 - 6.0 VDD-1
•The current of any
unmeasurement pin
is not over 1mA.
VOH(5) S16 to S51
IOH=-5mA
4.5 - 6.0 VDD-1.8
VOH(6)
The current of any 4.5 - 6.0 VDD-1
unmeasurement pin
is not over 1mA.
(continue)
No.6700-13/21