LC86F3448B Datasheet, PDF (16/21 Pages) Sanyo Semicon Device – 8-bit 1-chip Microcontroller

LC86F3448B
Analog Mode RGB Characteristics at Ta = -10°C to +70°C, VSS = 0V
Parameter
Symbol
Pins
Conditions
VDD[V]
Ratings
min.
typ.
max.
unit
Analog output
R.G.B
Low level output
0.45
0.5
0.55
voltage
Analog
output
mode
Intensity output
High level output
0.90
1.0
1.10
V
5.0
1.35
1.5
1.65
Time setting
R.G.B
70%
10pf load
50
ns
Sample Current Dissipation Characteristics at Ta = -10°C to +70°C, VSS = 0V
The sample current dissipation characteristics is the measurement result of Sanyo provided evaluation board when the
recommended circuit parameters shown in the sample oscillation circuit characteristics are used externally.
The currents through the output transistors and the pull-up MOS transistors are ignored.
Parameter
Symbol
Pins
Conditions
VDD[V]
Ratings
unit
min
typ
max
Current dissipation
during basic
operation
IDDOP(1)
VDD
•FmX’tal=32.768kHz
X’tal oscillation
•System clock : VCO
•VCO for OSD operating
•OSD is Digital mode
•Internal RC oscillation stops
4.5 to 5.5
12
24
mA
IDDOP(2)
VDD
•FmX’tal=32.768kHz X’tal scillation
•System clock : VCO
•VCO for OSD operating
•OSD is Analog mode
•Internal RC oscillation stops
4.5 to 5.5
20
32
IDDOP(3)
VDD
•FmX’tal=32.768kHz X’tal scillation
•System clock : X’tal
(Instruction cycle time: 366.2µs)
•VCO for system stops
•VCO for OSD stops
•Internal RC oscillation stop
•Data slicer, AD converters stop
4.5 to 5.5
70
300 µA
Current dissipation
in HALT mode
IDDHALT(1)
VDD
•HALT mode
•FmX’tal=32.768kHz
X’tal oscillation
•System clock : VCO
4.5 to 5.5
•VCO for OSD stops
•Internal RC oscillation stops
IDDHALT(2)
VDD
•HALT mode
•FmX’tal=32.768kHz
X’tal oscillation
•VCO for system stops
4.5 to 5.5
•VCO for OSD stops
•System clock : Internal RC
IDDHALT(3)
VDD
•HALT mode
•FmX’tal=32.768kHz
X’tal oscillation
•VCO for system stops
4.5 to 5.5
•VCO for OSD stops
•System clock : X’tal
Current dissipation
in HOLD mode
IDDHOLD
VDD
•HOLD mode
•All oscillation stops.
4.5 to 5.5
Note 3: The currents of the output transistors and the pull-up MOS transistors are ignored.
3
7 mA
400 1000
µA
55
200
0.05
20 µA
No.A0120-16/21