LC86E6449 Datasheet, PDF (14/22 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller with the UVEPROM

LC86E6449
3. Electrical Characteristics at Ta=+10°C to +40°C, VSS1=VSS2=0V
Parameter
Input high
current
Symbol
Pins
IIH(1) Ports 0,3 at open
drain output
IIH(2) •Ports 1,3
•Port 0 without
pull-up MOS Tr.
Input low
current
IIH(3)
IIH(4)
IIH(5)
•Ports 70,71,72,73
without pull-up
MOS Tr.
•Port 8
RES
Ports 74 ,75
IIH(6) S28 to S37
IIL(1)
•Ports 1,3
•Port 0 without
pull-up MOS Tr.
IIL(2)
IIL(3)
IIL(4)
•Ports 70,71,72,73
without pull-up
MOS Tr.
•Port 8
RES
Ports 74 ,75
Output high
voltage
VOH(1) Ports 0,1,3 of
VOH(2) CMOS output
VOH(3) S0/T0 to S15/T15
VOH(4)
VOH(5) S16 to S37
VOH(6)
Output low
voltage
VOL(1) Ports 0,1,3
VOL(2)
VOL(3)
VOL(4) Port 70
Pull-up MOS Rpu •Ports 0,1,3
Tr. resistor
•Ports 70,71,72,73
Conditions
•Output disable
•VIN=13.5V
(including off-leakage
current of output Tr.)
•Output disable
•Pull-up MOS Tr. OFF.
•VIN=VDD
(including off-leakage
current of output Tr.)
VIN=VDD
VIN=VDD
Using as port
VIN=VDD
•Output disable
•VIN=VDD
•Output disable
•Pull-up MOS Tr. OFF.
•VIN=VSS
(including off-leakage
current of output Tr.)
VIN=VSS
VIN=VSS
Using as port
VIN=VSS
IOH=-1.0mA
IOH=-0.1mA
IOH=-20mA
•IOH=-1.0mA
•The current of these each
pins is not over 1mA.
IOH=-5mA
•IOH=-1.0mA
•The current of these each
pins is not over 1mA.
IOL=10mA
IOL=1.6mA
•IOL=1mA
•The current of these each
pins is not over 1mA.
IOL=1mA
VOH=0.9VDD
Continue.
VDD[V]
4.5 to 6.0
Ratings
unit
min. typ. max.
5 µA
4.5 to 6.0
1
4.5 to 6.0
1
4.5 to 6.0
1
4.5 to 6.0
1
4.5 to 6.0
1
4.5 to 6.0 -1
4.5 to 6.0 -1
4.5 to 6.0 -1
4.5 to 6.0 -1
4.5 to 6.0 VDD-1
V
4.5 to 6.0 VDD-0.5
4.5 to 6.0 VDD-1.8
4.5 to 6.0 VDD-1
4.5 to 6.0 VDD-1.8
4.5 to 6.0 VDD-1
4.5 to 6.0
1.5
4.5 to 6.0
0.4
4.5 to 6.0
0.4
4.5 to 6.0
4.5 to 6.0 15
0.4
40 70 kΩ
No.6746-14/22